Tập tin:Flag of Belarus (construction sheet).svg

Nội dung trang không được hỗ trợ ở ngôn ngữ khác.
Tủ sách mở Wikibooks

Tập tin gốc(tập tin SVG, 1.282×686 điểm ảnh trên danh nghĩa, kích thước: 10 kB)

Tập tin này được lưu ở Wikimedia Commons và nó có thể được sử dụng ở các dự án khác. Lời miêu tả của tập tin tại trang mô tả được hiển thị dưới đây.

Miêu tả

Miêu tả
English: Flag of Belarus — construction sheet
Ngày
Nguồn gốc

Tác phẩm được tạo bởi người tải lên. Basic geometry and dimensions from the description in Belarus Law No. 301-Z.

The national flag of the Republic of Belarus is a rectangular panel consisting of two horizontal colored stripes: the upper one is red and the lower one is green. The ratio of the width of the red and green stripes is 2:1. The ratio of the width of the State Flag of the Republic of Belarus to its length is 1:2. At the pole there is a Belarusian national ornament of red color on a white field, which is 1/9 of the length of the State Flag of the Republic of Belarus. The national flag of the Republic of Belarus is mounted on a staff (flagpole), which is painted in golden (ocher) color. The ratio of the width of the State Flag of the Republic of Belarus to the length of the staff is 1:3.

— English translation of Chapter 2, Article 4 Law 301-Z

The version of Law No. 301-Z linked above contains a small blurry image of the flag with no labeled dimensions. The image clearly shows a vertical red stripe along the hoist that is not mentioned in the text.

In addition to Law 301-Z, the Belarus State Committee on Standardization maintains standards for the flag in СТБ 911-2008. СТБ 911-2008 was updated in 2009 with text that can be seen at ru.wikisource.org.

The length of the flag is limited from the pocket of the flagpole by a vertical red stripe with a width equal to 121 of the ornament horizontally.

— translation of 2009 amendment to СТБ 911-2008

That text can be interpreted as a vertical red stripe between the hoist and the ornament; it is contained within the borders of the flag and is not part of the hem or pocket. Oddly enough, the specification drawing included with the text in the 2009 update for СТБ 911-2008 did not include the red stripe. Oops.

In 2012, the government amended СТБ 911-2008 again and added a new specification drawing that did include the red stripe: [1]. The specification drawing includes dimensions for the red stripe and the ornament. Sadly the specification drawing is low quality and presented to us only in JPG format which makes it impossible to recreate the internal geometry of the ornament with any degree of precision.

The government does provide an larger JPG image at mfa.gov.by/sgp/state_symbols. It is higher resolution than the image in СТБ 911-2008, but it is still a JPG and it is impossible to perfectly extract precise internal geometry for the ornament. Also, the width of the ornament in the JPG is about 4% wider than the the law dictates.... and the red vertical stripe is about 3% wider than the dictated by СТБ 911-2008. Oops again.


The red vertical stripe on this construction sheet is set at exactly 121 the width of the ornament as per СТБ 911-2008.

The ornament on this construction sheet is based on best effort measurements from the JPG image listed above. It has been squeezed to make its width 19 the length of the flag, and its internal coordinates have been snapped to 200×900 grid. Note that due the the low quality of the source JPG image, there is no justification to use a higher resolution than 200×900. Reflectional symmetry (horizontal and vertical) has been applied. For scale purposes, a 100x450 grid has been drawn on top of the ornament, but this is not to imply that the designer of the ornament used any grid at all. Attempting to determine the grid size (if any) that was used for the original design of the ornament is an exercise in complete and utter frustration.


The ornament can potentially improved by redrawing it on a grid with a small number of large rectangles as seen in File:Belarus_flag_pattern.svg, File:Flag_of_Belarus_(ornaments).svg, and, vexillographia.ru. In one the examples shown at vexillographia.ru, all the lines in the ornament are the same width as the vertical red stripe; it gives the flag a sharp and clean look. But alas, any such modifications are in violation of Chapter 1, Article 3 of the Flag Law 301-Z.

The State Flag of the Republic of Belarus and its image, regardless of their size, must exactly correspond to the standard of the State Flag of the Republic of Belarus.

— Chapter 1, Article 3 Law 301-Z
Tác giả MapGrid
Giấy phép
(Dùng lại tập tin)
2022 Russian Invasion Zed symbol Từ chối trách nhiệm pháp lý
Hình ảnh này hiển thị (hoặc tương tự) một biểu tượng được sử dụng bởi Liên bang Ngalực lượng vũ trang của nó hoặc một tổ chức liên kết chặt chẽ với tổ chức đó, hoặc một bên khác của ủng hộ hoặc tôn vinh các cuộc chiến tranh xâm lược hoặc hành vi gây hấn.

Việc sử dụng phù hiệu cũng có thể bị coi là bất hợp pháp tại Cộng hoà Séc, Đức, Kazakhstan, Kyrgyzstan, Latvia, Lithuania, Moldova, Ba Lan, Ukraine và các nước khác, tùy thuộc vào ngữ cảnh.

Giấy phép

Insignia Đây là hình ảnh một lá cờ, huy hiệu, con dấu hoặc một loại dấu hiệu chính thức khác. Việc sử dụng các biểu tượng như vậy bị hạn chế ở một số quốc gia. Những hạn chế này là độc lập với tình trạng bản quyền.
Tác phẩm này không đủ tiêu chuẩn để được bảo hộ bản quyền và do đó thuộc phạm vi công cộng vì nó chỉ hoàn toàn gồm những thông tin là tài sản chung và không chứa sự sáng tạo.

Chú thích

Ghi một dòng giải thích những gì có trong tập tin này
Flag of Belarus — construction sheet

Khoản mục được tả trong tập tin này

mô tả

Lịch sử tập tin

Nhấn vào ngày/giờ để xem nội dung tập tin tại thời điểm đó.

Ngày/GiờHình xem trướcKích cỡThành viênMiêu tả
hiện tại13:55, ngày 11 tháng 1 năm 2023Hình xem trước của phiên bản lúc 13:55, ngày 11 tháng 1 năm 20231.282×686 (10 kB)MapGridReduced all dimensions by a factor of 21 because I think it may be easier for the brain to interpret smaller numbers. It comes down to a tradeoff between fractions or large integers. There is no change to the flag geometry.
23:17, ngày 6 tháng 1 năm 2023Hình xem trước của phiên bản lúc 23:17, ngày 6 tháng 1 năm 20231.282×686 (10 kB)MapGridUploaded own work with UploadWizard

Không có trang nào sử dụng tập tin này.

Sử dụng tập tin toàn cục

Những wiki sau đang sử dụng tập tin này:

Đặc tính hình